0/5
(0 Reviews)
Solenoid valves UW
Price: Call
UW series is direct, multiplex, connected diaphragm, conductive and normally closed.
Valve body made of forged or cast bronze.
Able to be operated under very low pressure.
Standard voltage: AC110V/AC220V (50/60Hz)/DC24V.
AC Voltage tolerance: ±10%; DC Voltage tolerance: ±1%.
Screwed end: BSPT; Specific specification is acceptable to NPT, BSP DIN and NASS Coil.
Custom-made AC/DC voltage is acceptable.
Acceptable for specific fluid type when ordering (ex. Steam, gas, vacuum, diesel, gasoline)
Acceptable for operating temperature to customize Viton (130oC) and Silicone (130oC)
Related Products
-
Solenoid valves UD
SKU: UDPrice: CallUD series is direct-acting, conductive and normally closed.
Valve body made of forged brass.
Able to be operated directly without pressure.
Standard voltage: AC110V/AC220V (50/60Hz)/DC24V
AC Voltage tolerance: ±10%; DC Voltage tolerance: ±1%.
Screwed end: BSPT; Specific specification is acceptable to NPT, BSP, DIN and NASS Coil.
Custom-made AC/DC voltage is acceptable.
Acceptable for specific fluid type when ordering (ex. Steam, gas, vacuum, diesel, gasoline).
Acceptable for operating temperature to customize Viton (130oC) and Silicone (130oC)
-
Solenoid valves US
SKU: USPrice: CallUS series is multiplex, pilot operated piston, conductive and normally closed.
Valve body made of cast bronze.
Minimum pressure of 0.5 kgf/cm3 is required.
Standard voltage: AC110V/AC220V (50/60Hz)/DC24V
AC Voltage tolerance: ±10%; DC Voltage tolerance: ±1%.
Screwed end: BSPT; Specific specification is acceptable to NPT, BSP and others.
Custom-made AC/DC voltage is acceptable.
Acceptable for heavy oil fluid to customize.
In case of pressure over 15kg/cm3, customization for higher pressure is required for definite fluid type and practically working pressure.
Suitable and applicable for horizontal installation, excluding for vertical installation.
